| Application: | Livestock and Poultry Breeding |
|---|---|
| Thickness: | 15cm |
| Certification: | ISO9001:2008 |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Cooling Pad System
Product Pescription
Product application
Poultry and animal husbandry: chicken farms, pig farms, cattle farms, livestock and poultry farming, etc.
Greenhouses and horticulture industry: vegetable storage, seed houses, floral planting, straw mushroom plantations, etc.
Industrial cooling: factory cooling and ventilation, industrial humidification, pre coolers, air handling units, etc.
Product Parameter
Chart 1
| Model | Frame | Color |
| 7090/ 7060/ 6090/ 5090 |
GS/SS/AL | Brown |
| Green | ||
| Green/Brown | ||
| Black coated-single side(washable) | ||
| Green coated-single side (washable) | ||
| Yellow coated-single side (washable) |
Chart 2
| Model | Heighe(mm) | Width(mm) | Trickness(mm) | Angle |
| 7090 | 1500/1800/2000/Customized | 300/600/Customized | 100/150/200/Customized | 45°/45° |
| 7060 | 1500/1800/2000/Customized | 300/600/Customized | 100/150/200/Customized | 45°/15° |
| 6090 | Customized | Customized | Customized | 45°/45° |
| 5090 | Customized | Customized | Customized | 45°/45° |
Product Feature
1. G-repu Cooling Pad use the new material and the space crossing linking technology, high absorbability, high water-resistant, anti-mildew and long service life
2. The products have large evaporative area, cooling efficiency as high as 80%
3. The products contain surface active agent, natural water absorbability, fast pervasion speed, lasting effectiveness. A drop of water can diffuse in 4-5 seconds.
4. The products don't contain phenol which easy to skin allergy and other chemical substances, when installed non-toxic harmless to human body,safety, energy saving, environment protection and economic applicable.
5. Strict production as per standard, width of 600mm cooling pad involves 85 sheets; Raw material adopt imported kraft paper (100GSM, thickeness: 0.18-0.20mm, tension resistance at 70N, absorbability height as 45mm/10min, moisture at 5-8%, humidity at 18N).
matters needing attention
1. Use water with better quality; Cover the water supply tank to prevent exposure to sunlight and the entry of dust in the air; Cut off the water source and let the fan run for another period of time; The water self-sufficiency system is isolated from other systems; Wet curtains should avoid direct sunlight.
2. Water quality
The pH value of circulating water is maintained between 6-9 (pure water with a pH value of 7). If the pH value is too high or too low, it will cause damage to the wet curtain; The calcium carbonate precipitation contained in hard water does not harm the wet curtain. It needs to be maintained within a limited range. If the concentration of sodium chloride (soft water) exceeds (or is approximately) 50000ppm, salt substances will precipitate on the wet curtain, reducing the airflow it passes through; The concentration of salt in circulating water must be within 50000ppm, and the concentration of salt in mixed water must be within 40000 ppm.
3.Clean
If the dust in the air tends to block the passage of airflow, the normal operation of the system can usually remove these obstacles. If necessary, low-pressure steam injection or gentle scrubbing can be used. Do not use chemicals such as chlorine or other pungent odors for cleaning.
4. Appropriate water level
Do not overflow the water in the system. If the water level is too high, the bottom of the wet curtain will remain immersed in water and become excessively filled, which will affect the self feeding system of the medium and shorten its service life.
5.Maintain drainage
As water continues to evaporate and new water is constantly replenished, salt and minerals are retained during the water cycle. To reduce the formation of sedimentation and scale, an automatic drainage device is required, as the drainage rate is 5% to 10% of the evaporation rate, which mainly depends on the hardness of the water and the level of air pollution. Under normal operating conditions, the drainage rate should be 20% of the maximum evaporation rate under poor conditions.
6.Make the water evenly distributed on the Cooling Pad
Control the water supply by adjusting the water pump. Clean the water tank, water pump inlet, filter, and water pipe, etc. Clean the dirt inside each water circulation system.
7.Annual shutdown
At the end of each quarter, drain all water pumps, sinks, storage rooms, and wet curtains. If there is residual water in the system, it will accumulate, precipitate, and produce algae. When used again next time, it will block the holes in the water pump, water distribution pipe, and wet curtain.
Routine maintenance
1. After the water pump stops for 30 minutes, turn off the fan to ensure complete drying. After the Cooling Pad system stops running, check whether the accumulated water in the sink has been drained to avoid long-term immersion of the bottom of the wet curtain in water1. After the water pump stops for 30 minutes, turn off the fan to ensure complete drying. After the wet curtain system stops running, check whether the accumulated water in the sink has been drained to avoid long-term immersion of the bottom of the Cooling Pad in water
2. Cooling Pad cleaning
Remove scale and algae from the surface of the Cooling Pad. After thoroughly drying the Cooling Pad, use a soft bristled brush to gently brush up and down, avoiding horizontal brushing. (You can first brush a portion to check if the Cooling Pad can withstand brushing.) Then only start the water supply system and rinse the surface of the Cooling Pad of scale and algae. (Avoid washing Cooling Pad with steam or high-pressure water).
3.Mouse pest control
In the season when Cooling Pad are not used, rodent control nets can be installed or rodenticides can be sprayed under the Cooling Pad.
4.Cleaning of spray pipes
Open the screw plugs at both ends, insert a rubber hose with an outer diameter of about 25, and connect the other end to tap water for rinsing.
5.If the water pump is not used for a period of time, it should be placed in clean water, powered on for 5 minutes, cleaned of mud inside and outside the pump, and then wiped dry to remove rust proof oil and placed in a ventilated and dry place
About our Company
Our products
Main stock line system,feeding system,Nipple drinking system,Ventilation system,Cooling pad system,Environment control system,Spraying system,Spraying accessories,Heating system,Swine/pig poutry equipment,etc.
Our services
1. Site selection of standardization chicken farm.
2. Chicken house design.
3. Construction guidance.
4. Breeding worker training.
5. On site technology instruction.
6. Lifetime technical support.
Product advantages
Advantages to use our automatic poultry equipment :
1. Time saving
2. Labour saving
3. Increasing chicken living rate.
4. High quality to ensure non stopping running of your house.
5. Comparatively cheap price.
Our customers
Remark
Price just for customers reference.
Welcome contact us for detailed price list and more product informations!
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}